Programable Logic Control (PLC) Automation
Jayakarta Hotel, Bandung | July 12-16, 2010 | Rp.8.250.000,-
There has always a great need for communication within industries. However, in the present, the focal points have changed. In the past, integration considered the different levels in the automation process where in the lowest level sensors and actuators communicate with a controller. Communication for the different levels was solved separately using the well known communication protocols. Now there are quite different demands. From underneath field devices with more intelligence, stand alone production equipment and other automation parts need to communicate large quantities of data in fast and deterministic fashion. From the top level (management level), the demands are production planning and control integration, quality management, traceability, maintenance systems and others. There is a need to integrate everything from sensors to the board of directors, from remote plants to local operator station, etc. This calls for a better communication.
Recently, Industrial Ethernet provide that field buses do not already offer, such as: integration to the office world, more bandwidth and bigger data package for communication, faster real time communication, homogenous networking mostly using Ethernet, integration of existing field buses, and many more. These properties have motivated to introduce Industrial Ethernet solution.
In this training program, we have designed a course that will show participants the advantage of industrial Ethernet technology, architecture/ topology, the needed software, the integration of existing field buses, the application, etc.
Gives the communication principle and application. Introduces Modbus communication on PLC. Provides networking topology in industrial automation and how to create networking with PLC. Describes Modbus TCP/IP communication on Ethernet. Provides integration of existing Modbus communication.
OBJECTIVE�YOU WILL BE ABLE TO
- Understand the concept of communication
- Understand the concept of networking
- Identify the requirement for communication
- Know Modbus and Modbus TCP/ IP Protocols
- Understand the concept of networking
- Use and implement communication and networking
- Integrate the PLC networking
- Introduction to Plant automation
- Basic Communication
- PLC Networking
- Modbus on Ethernet
- PLC Integration
- Study Case Application of PLC
Classroom/Demonstration/ Laboratory Exercise:
- Computer Facilities with Personal Computer Intel Pentium III and 4
- Practical work using PLC (Schneider)
- Simulation using MATLAB Software
- Application using Simulator Kit
Operator, Technician, Maintenance, Engineers dealt with industrial control and automation, especially working with PLC.
DR. Ir. Endra Joelianto
DR. Ir. Endra Joelianto is an expert in control engineering. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust PID Controller, Advanced Process Control, Industrial Automation using PLC/ DCS. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosophy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Australia.
He is coordinator of Intelligent Control and Automation, and founder of PLC Research Group, Laboratorium Instrumentasi dan Kontrol (LINK), Departemen Teknik Fisika, Institut Teknologi Bandung. He was the founder and the director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung. The Schneider-OMRON PLC Training Center has cooperation with PT. Schneider Electric Indonesia, PT. OMRON Corporation Japan, Invensys WONDERWARE.
He was the project leader for TPSDP Retooling Program Batch II-DIKNAS for Training Program on “INDUSTRIAL AUTOMATION USING PLC” 2004 and Co-provider for the same retooling program Batch II on “INDUSTRIAL CONTROL AND AUTOMATION” by PT. Cahaya Sumirat, Bandung. In 2005, he leads the retooling project entitled PLC for Industrial Control and Automation at the Department of Engineering Physics, ITB
He attended several professional trainings on PLC, DCS and Instruments Calibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advance PLC OMRON, Jakarta (2004), Cleaner Production: Application in Industries, University of Kwazulu-Natal, South Africa-ITB, Bandung (2005). Advanced Process Control, ASPEN Tech., Jakarta, (2005)
He serves as instructor either for public, universities or in-house training on instrumentation and process control to universities, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Petrokimia Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PT. ALSTOM Indonesia, PERTAMINA, British Petroleoum, Maxus, Amoseas, PT. Nusa Halmahera Mineral, PT. Indonesia Jaya Power, Indonesia Power-Paiton, PT. Riau Pulp and Paper, Indonesian Cement and Concrete Institut (ISBI), LIPI-Bandung, LAPI-ITB, POLMAN-Bandung, etc.
July 12-16, 2010
Jayakarta Hotel, Bandung
Rp.8.250.000,- per participant, excluding accommodation & tax.